2014 Oregon Department of Geology and Mineral Industries (DOGAMI) Oregon Lidar DEM: Crooked Ochoco

Metadata also available as

Metadata:

Identification_Information:
Citation:
Citation_Information:
Originator: Oregon Department of Geology and Mineral Industries (DOGAMI)
Originator:
Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), Office for Coastal Management (OCM)
Publication_Date: 20170615
Title:
2014 Oregon Department of Geology and Mineral Industries (DOGAMI) Oregon Lidar DEM: Crooked Ochoco
Publication_Information:
Publication_Place: Charleston, SC
Publisher: NOAA's Ocean Service (NOS), Office for Coastal Management (OCM)
Online_Linkage: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=6358
Online_Linkage:
https://coast.noaa.gov/htdata/raster2/elevation/OLC_crooked_ochoco_2014_6358
Online_Linkage: https://coast.noaa.gov/dataviewer
Online_Linkage: https://coast.noaa.gov
Description:
Abstract:
WSI, a Quantum Spatial company, has collected lidar data for the Oregon LiDAR Consortium (OLC) Crooked Ochoco study area. This study area is adjacent to the Ochoco study area delivered July 31, 2013. The northwestern section of Crooked Ochoco was acquired before snow fell in the study area at the end of 2013. Acquisition of the remaining areas was completed in summer 2014. The collection of high resolution geographic data is part of an ongoing pursuit to amass a library of information accessible to government agencies as well as the general public.
In September and December 2013, and May and June 2014, WSI employed lidar in order to obtain a total area flown of 159,270 acres. Settings for LiDAR data capture produced an average resolution of at least eight pulses per square meter. September flights utilized a Leica ALS 50 sensor mounted in a Piper Navajo. December flights utilized a Leica ALS 70 sensor mounted in a Cessna Caravan. May 2014 flights used a Leica ALS 60 sensor mounted in a Cessna Caravan and the June 2014 flights used Leica ALS 70 sensor in a Partenavia P68.
Final products included lidar point cloud data, one-meter digital elevation models of bare earth ground model and highest-hit returns, intensity rasters, study area vector shapes, and corresponding statistical data. Final deliverables were projected in Oregon Statewide Lambert Conformal Conic. This metadata was created for the bare earth digital elevation models.
Purpose: Provide high resolution terrain elevation data.
Supplemental_Information:
A final report for this project may be viewed at: https://coast.noaa.gov/htdata/lidar2_z/geoid12b/data/6357/supplemental/2014_OLC_Crooked_Ochoco.pdf
Time_Period_of_Content:
Time_Period_Information:
Range_of_Dates/Times:
Beginning_Date: 20130927
Ending_Date: 201406
Currentness_Reference: ground condition
Status:
Progress: Complete
Maintenance_and_Update_Frequency: None planned
Spatial_Domain:
Bounding_Coordinates:
West_Bounding_Coordinate: -121.12957
East_Bounding_Coordinate: -120.17879
North_Bounding_Coordinate: 44.600394
South_Bounding_Coordinate: 43.98694
Keywords:
Theme:
Theme_Keyword_Thesaurus: ISO 19115 Topic Category
Theme_Keyword: elevation
Theme:
Theme_Keyword_Thesaurus: None
Theme_Keyword: Bathymetry/Topography
Theme_Keyword: Lidar
Theme_Keyword: Light Detection and Ranging
Theme_Keyword: DEM
Theme_Keyword: Digital Terrain Model
Theme_Keyword: DOGAMI
Theme_Keyword: Oregon Lidar Consortium
Theme_Keyword: Elevation data
Theme_Keyword: Bare earth
Theme_Keyword: High-resolution
Theme_Keyword: Bare ground
Place:
Place_Keyword_Thesaurus: None
Place_Keyword: United States
Place_Keyword: Oregon
Place_Keyword: Crooked Ochoco
Place_Keyword: Pacific Northwest
Access_Constraints: None
Use_Constraints:
Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations.
Point_of_Contact:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: DOGAMI
Contact_Person: Jacob Edwards
Contact_Address:
Address_Type: mailing and physical
Address: 800 NE Oregon St. #28, Ste. 965
City: Portland
State_or_Province: OR
Postal_Code: 97232
Country: USA
Contact_Voice_Telephone: 971-673-1557
Contact_Electronic_Mail_Address: jacob.edwards@oregon.gov
Browse_Graphic:
Browse_Graphic_File_Name:
https://coast.noaa.gov/htdata/lidar2_z/geoid12b/data/6357/supplemental/2014_OLC_Crooked_Ochoco_area.kmz
Browse_Graphic_File_Description: A polygon footprint of this data set.
Browse_Graphic_File_Type: kmz
Data_Set_Credit: DOGAMI
Data_Quality_Information:
Logical_Consistency_Report:
Upon receipt from vendor (WSI), all LiDAR data was independently reviewed by staff from the Oregon Department of Geology and Mineral Industries (DOGAMI) to ensure project specifications were met. All data were inventoried for completeness and data were checked for quality, which included examining LiDAR data for errors associated with internal data consistency, model quality, and accuracy.
Completeness_Report:
Lidar data has been collected and processed for all areas within the project study area.
Positional_Accuracy:
Horizontal_Positional_Accuracy:
Horizontal_Positional_Accuracy_Report: unknown
Vertical_Positional_Accuracy:
Vertical_Positional_Accuracy_Report:
Vertical accuracy statistical analysis uses ground survey points in open areas where the LiDAR system has a "very high probability" that the sensor will measure the ground surface and is evaluated at the 95th percentile. For the OLC Crooked Ochoco study area, a total of 2,413 RTK points were collected. No independent survey data were collected, thus statistics are "Compiled to Meet".
For more information about the vertical accuracy, please refer to the final report, listed above in the Supplemental_Information field of this metadata record.
Quantitative_Vertical_Positional_Accuracy_Assessment:
Vertical_Positional_Accuracy_Value: 0.03
Vertical_Positional_Accuracy_Explanation: Compiled to meet root mean square error.
Lineage:
Process_Step:
Process_Description:
September flights utilized a Leica ALS 50 sensor mounted in a Piper Navajo. December flights utilized a Leica ALS 70 sensor mounted in a Cessna Caravan. May 2014 flights used a Leica ALS 60 sensor mounted in a Cessna Caravan and the June 2014 flights used Leica ALS 70 sensor in a Partenavia P68. The system was flown at a variable height above ground level, capturing a scan angle of +/-15 degrees from nadir. These settings were developed to yield points with an average native density of greater than eight pulses per square meter over terrestrial surfaces.
Process_Date: 2014
Process_Contact:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: WSI
Contact_Address:
Address_Type: mailing and physical
Address: 421 SW 6th Avenue, Suite 800
City: Portland
State_or_Province: OR
Postal_Code: 97204
Contact_Voice_Telephone: (503) 505-5100
Process_Step:
Process_Description:
The NOAA Office for Coastal Management (OCM) received the files in the proprietary ESRI grid format. The files were converted to floating point GeoTIFF format in vertical meters using gdal_translate from GDAL version 2.1.1.
Process_Date: 201705
Process_Contact:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: NOAA Office for Coastal Management
Contact_Address:
Address_Type: mailing and physical
Address: 2234 South Hobson Avenue
City: Charleston
State_or_Province: SC
Postal_Code: 29405-2413
Contact_Voice_Telephone: 843-740-1202
Contact_Electronic_Mail_Address: coastal.info@noaa.gov
Spatial_Data_Organization_Information:
Direct_Spatial_Reference_Method: Raster
Raster_Object_Information:
Raster_Object_Type: Grid Cell
Spatial_Reference_Information:
Horizontal_Coordinate_System_Definition:
Planar:
Map_Projection:
Map_Projection_Name: Oregon Statewide Lambert Conformal Conic
Lambert_Conformal_Conic:
Standard_Parallel: 43
Standard_Parallel: 45.5
Longitude_of_Central_Meridian: -120.5
Latitude_of_Projection_Origin: 41.75
False_Easting: 1312335.958005249
False_Northing: 0.0
Planar_Coordinate_Information:
Planar_Coordinate_Encoding_Method: coordinate pair
Coordinate_Representation:
Abscissa_Resolution: 3
Ordinate_Resolution: 3
Planar_Distance_Units: foot_us
Geodetic_Model:
Horizontal_Datum_Name: North American Datum of 1983 (2011)
Ellipsoid_Name: Geodetic Reference System 80
Semi-major_Axis: 6378137.000000
Denominator_of_Flattening_Ratio: 298.257222
Vertical_Coordinate_System_Definition:
Altitude_System_Definition:
Altitude_Datum_Name: North American Vertical Datum of 1988 (NAVD88; Geoid12a)
Altitude_Resolution: 0.001
Altitude_Distance_Units: Meters
Altitude_Encoding_Method:
Explicit elevation coordinate included with horizontal coordinates
Distribution_Information:
Distributor:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: NOAA Office for Coastal Management
Contact_Address:
Address_Type: mailing and physical
Address: 2234 South Hobson Avenue
City: Charleston
State_or_Province: SC
Postal_Code: 29405-2413
Contact_Voice_Telephone: 843-740-1202
Contact_Electronic_Mail_Address: coastal.info@noaa.gov
Resource_Description: Downloadable Data
Distribution_Liability:
Any conclusions drawn from the analysis of this information are not the responsibility of the Oregon Department of Geology and Mineral Industries (DOGAMI), the Office for Coastal Management or its partners.
Custom_Order_Process:
This data can be obtained on-line at the following URL: https://coast.noaa.gov/dataviewer
Metadata_Reference_Information:
Metadata_Date: 20170821
Metadata_Contact:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: NOAA Office for Coastal Management
Contact_Address:
Address_Type: mailing and physical
Address: 2234 South Hobson Avenue
City: Charleston
State_or_Province: SC
Postal_Code: 29405-2413
Contact_Voice_Telephone: 843-740-1202
Contact_Electronic_Mail_Address: coastal.info@noaa.gov
Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
Metadata_Standard_Version: FGDC-STD-001-1998
Generated by mp version 2.9.32 on Thu Oct 19 11:27:01 2017