| 2004 Southwest Florida Water Management District Lidar: Sarasota District | spatialRepresentationInfo|
|---|---|
| (MI_Metadata) fileIdentifier: gov.noaa.nmfs.inport:50029 language: LanguageCode: eng characterSet: (MD_CharacterSetCode) UTF8 hierarchyLevel: (MD_ScopeCode) dataset contact: (CI_ResponsibleParty) organisationName: OCM Partners contactInfo: (CI_Contact) phone: (CI_Telephone) voice: (missing) address: (CI_Address) role: (CI_RoleCode) resourceProvider contact: (CI_ResponsibleParty) organisationName: NOAA Office for Coastal Management contactInfo: (CI_Contact) phone: (CI_Telephone) voice: (843) 740-1202 address: (CI_Address) deliveryPoint: 2234 South Hobson Ave city: Charleston administrativeArea: SC postalCode: 29405-2413 country: (missing) electronicMailAddress: coastal.info@noaa.gov onlineResource: (CI_OnlineResource) linkage: https://coast.noaa.gov protocol: WWW:LINK-1.0-http--link name: NOAA Office for Coastal Management Website description: NOAA Office for Coastal Management Home Page function: (CI_OnLineFunctionCode) information role: (CI_RoleCode) pointOfContact dateStamp: DateTime: 2022-08-09T17:11:37 metadataStandardName: ISO 19115-2 Geographic Information - Metadata Part 2 Extensions for imagery and gridded data metadataStandardVersion: ISO 19115-2:2009(E) return to top spatialRepresentationInfo: return to top referenceSystemInfo: return to top referenceSystemInfo: (MD_ReferenceSystem) referenceSystemIdentifier: (RS_Identifier) authority: (CI_Citation) title: NAD83(HARN) date: (CI_Date) date: 2008-11-12 dateType: (CI_DateTypeCode) publication citedResponsibleParty: (CI_ResponsibleParty) organisationName: European Petroleum Survey Group contactInfo: (CI_Contact) onlineResource: (CI_OnlineResource) linkage: https://apps.epsg.org/api/v1/CoordRefSystem/4152/export/?format=gml role: (missing) code: urn:ogc:def:crs:EPSG:4152 version: 6.18.3 return to top referenceSystemInfo: (MD_ReferenceSystem) referenceSystemIdentifier: (RS_Identifier) authority: (CI_Citation) title: North American Vertical Datum of 1988 (NAVD88) (GEOID18) meters alternateTitle: North American Vertical Datum of 1988 (NAVD88) (GEOID18) meters citedResponsibleParty: (CI_ResponsibleParty) organisationName: (withheld) contactInfo: (CI_Contact) onlineResource: (CI_OnlineResource) linkage: https://apps.epsg.org/api/v1/VerticalCoordRefSystem/5703/?api_key=gml name: North American Vertical Datum of 1988 (NAVD88) (GEOID18) meters description: Link to Geographic Markup Language (GML) description of reference system. function: (CI_OnLineFunctionCode) information role: (CI_RoleCode) resourceProvider citedResponsibleParty: (CI_ResponsibleParty) organisationName: European Petroleum Survey Group contactInfo: (CI_Contact) onlineResource: (CI_OnlineResource) linkage: https://www.epsg.org/ name: European Petroleum Survey Group Geodetic Parameter Registry description: Registry that accesses the EPSG Geodetic Parameter Dataset, which is a structured dataset of Coordinate Reference Systems and Coordinate Transformations. function: (CI_OnLineFunctionCode) search role: (CI_RoleCode) publisher VerticalCS: metaDataProperty: CommonMetaData: type: vertical informationSource: OGP revisionDate: 2006-11-28 isDeprecated: false identifier: urn:ogc:def:cs:EPSG::6499 name: Vertical CS. Axis: height (H). Orientation: up. UoM: meter. remarks: Used in vertical coordinate reference systems. axis: CoordinateSystemAxis: descriptionReference: urn:ogc:def:axis-name:EPSG::9904 identifier: urn:ogc:def:axis:EPSG::114 axisAbbrev: H axisDirection: up code: urn:ogc:def:crs:EPSG::5703 return to top identificationInfo: (MD_DataIdentification) citation: (CI_Citation) title: 2004 Southwest Florida Water Management District Lidar: Sarasota District alternateTitle: swfwmd_sarasota_m63_metadata date: (CI_Date) date: 2005-05-10 dateType: (CI_DateTypeCode) publication identifier: (MD_Identifier) authority: (CI_Citation) title: NOAA/NMFS/EDM date: (inapplicable) code: Anchor: InPort Catalog ID 50029 citedResponsibleParty: (CI_ResponsibleParty) organisationName: (inapplicable) contactInfo: (CI_Contact) onlineResource: (CI_OnlineResource) linkage: https://www.fisheries.noaa.gov/inport/item/50029 protocol: WWW:LINK-1.0-http--link name: Full Metadata Record description: View the complete metadata record on InPort for more information about this dataset. function: (CI_OnLineFunctionCode) information role: (inapplicable) citedResponsibleParty: (CI_ResponsibleParty) organisationName: (inapplicable) contactInfo: (CI_Contact) onlineResource: (CI_OnlineResource) linkage: https://coast.noaa.gov protocol: WWW:LINK-1.0-http--link name: Citation URL description: Online Resource function: (CI_OnLineFunctionCode) download role: (inapplicable) citedResponsibleParty: (CI_ResponsibleParty) organisationName: (inapplicable) contactInfo: (CI_Contact) onlineResource: (CI_OnlineResource) linkage: https://coast.noaa.gov/dataviewer protocol: WWW:LINK-1.0-http--link name: Citation URL description: Online Resource function: (CI_OnLineFunctionCode) download role: (inapplicable) abstract: This metadata record describes the ortho & lidar mapping of Sarasota County, FL. The mapping consists of lidar data collected using a Leica ALS-40 Lidar Sensor, contour generation, and production of natural color orthophotography with a 30-cm GSD using imagery collected with a Leica ADS-40 Aerial Digital Camera. This topographic survey for Sarasota County covers 572 square miles and was acquired in two lift acquisitions. Lift 1 was on Feb 28 2004 and lift 2 was on Mar 4, 2004. The original lidar had gaps in the coverage and the areas were flown on May 15, 2004. Lidar data acquired with 2 meter nominal post spacing. Original contact information: Contact Name: Steve Dicks Contact Org: Southwest Florida Water Management District (SWFWMD) Phone: 352-796-7211 This data set is an LAZ (compressed LAS) format file containing LIDAR point cloud data. purpose: The purpose of this mapping project is to create and deliver digital terrain models (DTM), capable of generating one-foot contours and to produce orthophotography at a 200' scale. status: (MD_ProgressCode) completed pointOfContact: (CI_ResponsibleParty) organisationName: NOAA Office for Coastal Management contactInfo: (CI_Contact) phone: (CI_Telephone) voice: (843) 740-1202 address: (CI_Address) deliveryPoint: 2234 South Hobson Ave city: Charleston administrativeArea: SC postalCode: 29405-2413 country: (missing) electronicMailAddress: coastal.info@noaa.gov onlineResource: (CI_OnlineResource) linkage: https://coast.noaa.gov protocol: WWW:LINK-1.0-http--link name: NOAA Office for Coastal Management Website description: NOAA Office for Coastal Management Home Page function: (CI_OnLineFunctionCode) information role: (CI_RoleCode) pointOfContact pointOfContact: (CI_ResponsibleParty) organisationName: NOAA Office for Coastal Management contactInfo: (CI_Contact) phone: (CI_Telephone) voice: (843) 740-1202 address: (CI_Address) deliveryPoint: 2234 South Hobson Ave city: Charleston administrativeArea: SC postalCode: 29405-2413 country: (missing) electronicMailAddress: coastal.info@noaa.gov onlineResource: (CI_OnlineResource) linkage: https://coast.noaa.gov protocol: WWW:LINK-1.0-http--link name: NOAA Office for Coastal Management Website description: NOAA Office for Coastal Management Home Page function: (CI_OnLineFunctionCode) information role: (CI_RoleCode) custodian resourceMaintenance: (MD_MaintenanceInformation) maintenanceAndUpdateFrequency: (MD_MaintenanceFrequencyCode) unknown descriptiveKeywords: (MD_Keywords) keyword: Aerial Photography keyword: Bathymetry/Topography keyword: Contours keyword: Digital Orthophotography keyword: Digital Terrain Model (DTM) keyword: LIDAR type: (MD_KeywordTypeCode) theme thesaurusName: (CI_Citation) title: EDI Thesaurus date: (missing) descriptiveKeywords: (MD_Keywords) keyword: Lidar - partner (no harvest) type: (MD_KeywordTypeCode) project thesaurusName: (CI_Citation) title: InPort date: (inapplicable) resourceConstraints: (MD_LegalConstraints) useConstraints: (MD_RestrictionCode) otherRestrictions otherConstraints: Cite As: OCM Partners, [Date of Access]: 2004 Southwest Florida Water Management District Lidar: Sarasota District [Data Date Range], https://www.fisheries.noaa.gov/inport/item/50029. resourceConstraints: (MD_Constraints) useLimitation: NOAA provides no warranty, nor accepts any liability occurring from any incomplete, incorrect, or misleading data, or from any incorrect, incomplete, or misleading use of the data. It is the responsibility of the user to determine whether or not the data is suitable for the intended purpose. resourceConstraints: (MD_LegalConstraints) accessConstraints: (MD_RestrictionCode) otherRestrictions useConstraints: (MD_RestrictionCode) otherRestrictions otherConstraints: Access Constraints: None | Use Constraints: Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. | Distribution Liability: Any conclusions drawn for the analysis of this information are not the responsibility of the Office for Coastal Management or its partners. resourceConstraints: (MD_SecurityConstraints) classification: (MD_ClassificationCode) unclassified classificationSystem: (missing) handlingDescription: (missing) aggregationInfo: (MD_AggregateInformation) aggregateDataSetName: (CI_Citation) title: NOAA Data Management Plan (DMP) date: (unknown) identifier: (MD_Identifier) authority: (CI_Citation) title: NOAA/NMFS/EDM date: (inapplicable) code: 50029 citedResponsibleParty: (CI_ResponsibleParty) organisationName: (inapplicable) contactInfo: (CI_Contact) onlineResource: (CI_OnlineResource) linkage: https://www.fisheries.noaa.gov/inportserve/waf/noaa/nos/ocmp/dmp/pdf/50029.pdf protocol: WWW:LINK-1.0-http--link name: NOAA Data Management Plan (DMP) description: NOAA Data Management Plan for this record on InPort. function: (CI_OnLineFunctionCode) information role: (inapplicable) associationType: (DS_AssociationTypeCode) crossReference spatialRepresentationType: (MD_SpatialRepresentationTypeCode) vector language: eng; US topicCategory: (MD_TopicCategoryCode) elevation extent: (EX_Extent) geographicElement: (EX_GeographicBoundingBox) westBoundLongitude: -82.6558 eastBoundLongitude: -82.0403 southBoundLatitude: 26.9309 northBoundLatitude: 27.4754 temporalElement: (EX_TemporalExtent) extent: TimeInstant: description: | Currentness: Publication Date timePosition: 2004-02-28 temporalElement: (EX_TemporalExtent) extent: TimeInstant: description: | Currentness: Publication Date timePosition: 2004-03-04 temporalElement: (EX_TemporalExtent) extent: TimeInstant: description: | Currentness: Publication Date timePosition: 2004-05-15 supplementalInformation: The Report of Topographic Survey for Sarasota County may be viewed at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/63/supplemental/index.html return to top distributionInfo: (MD_Distribution) distributor: (MD_Distributor) distributorContact: (CI_ResponsibleParty) organisationName: NOAA Office for Coastal Management contactInfo: (CI_Contact) phone: (CI_Telephone) voice: (843) 740-1202 address: (CI_Address) deliveryPoint: 2234 South Hobson Ave city: Charleston administrativeArea: SC postalCode: 29405-2413 country: (missing) electronicMailAddress: coastal.info@noaa.gov onlineResource: (CI_OnlineResource) linkage: https://coast.noaa.gov protocol: WWW:LINK-1.0-http--link name: NOAA Office for Coastal Management Website description: NOAA Office for Coastal Management Home Page function: (CI_OnLineFunctionCode) information role: (CI_RoleCode) distributor transferOptions: (MD_DigitalTransferOptions) onLine: (CI_OnlineResource) linkage: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=63 protocol: WWW:LINK-1.0-http--link name: Customized Download description: Create custom data files by choosing data area, product type, map projection, file format, datum, etc. function: (CI_OnLineFunctionCode) download transferOptions: (MD_DigitalTransferOptions) onLine: (CI_OnlineResource) linkage: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/63/index.html protocol: WWW:LINK-1.0-http--link name: Bulk Download description: Simple download of data files. function: (CI_OnLineFunctionCode) download return to top dataQualityInfo: (DQ_DataQuality) scope: (DQ_Scope) level: (MD_ScopeCode) dataset report: (DQ_QuantitativeAttributeAccuracy) nameOfMeasure: Accuracy evaluationMethodDescription: The generated contours were NOT produced to be fully compliant with NSSDA accuracy standards for 2' contours. Contours were generated from lidar DTM as is without the benefit of photogrammetric breakline support. Lidar elevation data meets National Map Accuracy Standards. The digital orthophotography meets national mapping accuracy standards for 200 scale product. result: (missing) report: (DQ_AbsoluteExternalPositionalAccuracy) nameOfMeasure: Horizontal Positional Accuracy evaluationMethodDescription: The digital orthophotos fully comply with NMAS standards for production of orthophotos at a horizontal natural ratio of 1 to 2,400 with a ground pixel resolution of 1 foot. Tested 1.1 m (3.6-feet) horizontal accuracy at the 95% confidence level. result: (missing) report: (DQ_AbsoluteExternalPositionalAccuracy) nameOfMeasure: Vertical Positional Accuracy evaluationMethodDescription: The digital elevation model is fully compliant with National Standard for Spatial Data Accuracy (NSSDA) published by the Federal Geographic Data Committee (FGDC) in 1998. The NSSDA uses root-mean-square error (RMSE) to estimate positional accuracy. RMSE is the square root of the average of the set of squared differences between data set coordinate values and coordinate values from an independent source of higher accuracy for identical points. Accuracy is reported in ground distances at the 95% confidence level. Accuracy reported at the 95% confidence level means that 95% of the positions in the data set will have an error with respect to true ground position that is equal to or smaller than the reported accuracy value. The reported accuracy value reflects all uncertainties, including those introduced by geodetic control coordinates, compilation, and final computation of ground coordinate values in the product. The intended vertical accuracy of this project is 17.98 cm (0.59-feet) (95% confidence level) vertical. RMSE=9.144 cm (0.3-feet) for unobscured ground points, not tested. result: (missing) report: (DQ_CompletenessCommission) nameOfMeasure: Completeness Measure evaluationMethodDescription: Cloud Cover: 0 result: (missing) report: (DQ_CompletenessCommission) nameOfMeasure: Completeness Report evaluationMethodDescription: The following software is used for validation of the 1. Aerotriangulation - ISTAR Processing 2. DTM data - Z/I Imaging SSK 3. Digital Orthophotography - Z/I Imaging OrthoPro result: (missing) report: (DQ_ConceptualConsistency) nameOfMeasure: Conceptual Consistency evaluationMethodDescription: Compliance with the accuracy standard was ensured by the placement of GPS ground control prior to the acquisition of aerial photography. The following checks were performed. 1. The ground control and airborne GPS data stream were validated through a fully analytical bundle aerotriangulation adjustment. The residuals of the adjustment met the required standards for accuracy which are 1 part in 10,000 of the flying height for the horizontal position (X and Y) and 1 part in 9,000 or better of the flying height in elevation (Z). 2. The DTM (Digital Terrain Model) data were checked against the project control. The technician visited and confirmed the accuracy of the project mass points during initial processing. 3. Digital orthophotography was validated through an inspection of edge matching and visual inspection for image quality. result: (missing) lineage: (LI_Lineage) statement: (missing) processStep: (LI_ProcessStep) description: New ground control was established to control and orient the photography, and included only photo-identifiable features. The ground control network and airborne GPS data was integrated into a rigid network through the completion of a fully analytical bundle aerotriangulation adjustment. 1. The digital aerial photo data was ingested into the ISTAR processing system by uploading the data from portable hard drives. 2. The coverage of the imagery was checked for gaps and a directory tree structure for the project was established on one of the workstations. This project was then accessed by other workstations through the network. The criteria used for establishment of the directory structure and file naming conventions accessed through the network avoid confusion or errors due to inconsistencies in digital data. The project area was reviewed against the client-approved boundary. The technician verified that the datum and units of measurement for the supplied control were consistent with the project requirements. 3. The photogrammetric technician performed an automatic triangulation of the data using the ISTAR processing system. The aerotriangulation adjustment merged the airborne GPS, IMU, and ground control data into a project-wide network. 4. While ground control points (GCPs) were used, reliance on the GPS-/IMU-derived orientation parameters required significantly fewer GCPs than are typically used in aerotriangulation. 5. The adjustment was performed for each sortie and then multiple sorties were merged to produce a project-wide adjustment. 6. The aerotriangulation component of the ISTAR suite utilized the airborne GPS as a separate control source and held the IMU (Inertial Measurement Unit) parameters rigidly. 7. The accuracy of the final solution was verified by running the final adjustment, placing no constraints on any quality control points. The RMSE values for these points must fall within the tolerances above for the solution to be acceptable. dateTime: DateTime: 2004-09-30T00:00:00 processStep: (LI_ProcessStep) description: EarthData has developed a unique method for processing lidar data to identify and remove elevation points falling on vegetation, buildings, and other aboveground structures. The algorithms for filtering data were utilized within EarthData's proprietary software and commercial software written by TerraSolid. This software suite of tools provides efficient processing for small to large-scale, projects and has been incorporated into ISO 9001 compliant production work flows. The following is a step-by-step breakdown of the process. 1. Using the lidar data set provided by EarthData, the technician performs calibrations on the data set. 2. Using the lidar data set provided by EarthData, the technician performed a visual inspection of the data to verify that the flight lines overlap correctly. The technician also verified that there were no voids, and that the data covered the project limits. The technician then selected a series of areas from the data set and inspected them where adjacent flight lines overlapped. These overlapping areas were merged and a process which utilizes 3-D Analyst and EarthData's proprietary software was run to detect and color code the differences in elevation values and profiles. The technician reviewed these plots and located the areas that contained systematic errors or distortions that were introduced by the lidar sensor. 3. Systematic distortions highlighted in step 2 were removed and the data was re-inspected. Corrections and adjustments can involve the application of angular deflection or compensation for curvature of the ground surface that can be introduced by crossing from one type of land cover to another. 4. The lidar data for each flight line was trimmed in batch for the removal of the overlap areas between flight lines. The data was checked against a control network to ensure that vertical requirements were maintained. Conversion to the client-specified datum and projections were then completed. The lidar flight line data sets were then segmented into adjoining tiles for batch processing and data management. 5. The initial batch-processing run removed 95% of points falling on vegetation. The algorithm also removed the points that fell on the edge of hard features such as structures, elevated roadways and bridges. 6. The operator interactively processed the data using lidar editing tools. During this final phase the operator generated a TIN based on a desired thematic layer to evaluate the automated classification performed in step 5. This allowed the operator to quickly re-classify points from one layer to another and recreate the TIN surface to see the effects of edits. Geo-referenced images were toggled on or off to aid the operator in identifying problem areas. The data was also examined with an automated profiling tool to aid the operator in the reclassification. 7. The data were separated into a bare-earth DEM. A grid-fill program was used to fill data voids caused by reflective objects such as buildings and vegetation. The final DEM was written to an ASCII XYZ and LAS format. 8. The reflective surface data were also delivered in ASCII XYZ and LAS format. 9. Final TIN files are created and delivered. dateTime: DateTime: 2004-08-17T00:00:00 processStep: (LI_ProcessStep) description: This process describes the method used to compile hydro-breaklines to support H&H modeling efforts. The technical method used to produce hydro-breaklines for use in this project only included water features and they should not be confused with traditional stereo-graphic or field survey derived breaklines. Watershed Concepts and EarthData utilized techniques developed for FEMA flood map modernization projects to synthesize 3D break lines using digital orthophotos and lidar data. 1. For larger streams (widths greater than 50 feet), breaklines were collected on the left and right water edge lines. The 2D lines defining streams and other water bodies were manually digitized into ArcView shape file format from the ADS-40 digital imagery. Flat water bodies such as ponds were collected by examining points near the edge of water, were a low point could be quickly identified. This allowed the operators to draw an even-elevation breakline at that elevation around the water body's perimeter. 2. A bounding polygon, created from the edge of bank lines, was used to remove all lidar points from within the channels of streams and bodies of water. This step ensures that the lidar bare-earth point files match the breaklines. 3. The elevation component of the 3D streamlines (breaklines) was derived from the lowest adjacent bare earth lidar point and was adjusted to ensure that the streams flow downstream. The best elevation that can be derived for the 3D streamlines will be the water surface elevation on the date that the lidar data was acquired. 4. Automatic processes assigned elevations to the vertices of the centerline based on surrounding lidar points. The lines were then smoothed to ensure a continuous downhill flow. Edge-of-bank vertices were adjusted vertically to match the stream centerline vertices. 5. The new 3D lines were then viewed in profile to correct any anomalous vertices or remove errant points from the lidar DTM, which cause unrealistic "spikes" or "dips" in the breaklines. 6. For this project, hydro breaklines were generated in the matter described above for all streams and water bodies. a) A 2000 to identify any quality issues. b) An automated routine was run to check the data for closure of water bodies. c) An evaporation routine was run to remove lidar points from water bodies. d) A final routine was run to check the generate TINs for anomalies including outside township/range boundary and elevation extremes. 7. New TINs were then created from the remaining lidar points and newly created breaklines. 8. The breakline data set was then put into an ESRI shape file format 9. The 1 foot contours were generated in Microstation (using 2 foot specifications) with an overlay software package called TerraSolid. Within TerraSolid, the module Terramodeler was utilized to first create the tin and then a color relief was created to view for any irregularities before the contour generator was run. The contours were checked for accuracy over the DTM and then the Index contours were annotated. At this point the technician identified any areas of heavy tree coverage by collecting obscure shapes. Any contours that were found within these shapes are coded as obscure. The data set was viewed over the orthos before the final conversion. The contours were then converted to Arc/Info where final QC AMLs were run to verify that no contours were crossing. The contours were delivered in ESRI .shp format as a merged file. Due to the nature of the breaklines collected in accordance with FEMA guidelines, the contours do not meet any specified accuracy requirement and are delivered as is. dateTime: DateTime: 2005-04-15T00:00:00 processStep: (LI_ProcessStep) description: The digital orthophotography was produced in natural color at a natural ratio of 1 to 2,400 with a 1 ft pixel resolution. A step-by-step breakdown of the digital orthophoto production process follows. 1. Digital image swath files were visually checked for image quality on the networked ISTAR processing farm. 2. The digital image files were loaded onto the digital orthophoto production workstation. The following information was then loaded onto the workstation. - The camera parameters and flight line direction - Ground control and pass point locations - The exterior orientation parameters from the aerotriangulation process - ASCII file containing the corner coordinates of the orthophotos - The digital elevation model. - Project-specific requirements such as final tile size and resolution. -Orientation parameters developed from the aerotriangulation solution. A coordinate transformation based on the camera calibration fiducial coordinates was then undertaken. This transformation allowed the conversion of every measured element of the images to a sample/line location. Each pixel in an image was then referenced by sample and line (its horizontal and vertical position) and matched to project control. 3. The newly re-sected image was visually checked for pixel drop-out and/or other artifacts that may degrade the final orthophoto image. 4. DTM data were imported and written to the correct subdirectory on disk. 5. The DTM file was re-inspected for missing or erroneous data points. 6. A complete differential rectification was carried out using a cubic convolution algorithm that removed image displacement due to topographic relief, tip and tilt of the aircraft at the moment of exposure, and radial distortion within the camera. Each final orthophoto was produced at a natural scale of 1 to 2,400 with a 1ft pixel resolution. At this point in the process, the digital orthophotos covered the full aerial frame. 7. Each digital orthophoto image was visually checked for accuracy on the workstation screen. Selected control points (control panels or photo-identifiable points) that are visible on the original film were visited on the screen, and the X and Y coordinates of the location of the panel or photo-identifiable point were measured. This information was cross-referenced with the X and Y information provided by the original ground survey. If the orthophoto did not meet or exceed NMAS standards, the rectification was regenerated. The digital orthophotos were then edge-matched using proprietary software that runs in Z/I Imaging OrthoPro software package. Adjoining images were displayed in alternating colors of red and cyan. In areas of exact overlap, the image appears in gray-scale rendition. Offsets were colored red or cyan, depending on the angle of displacement. The operator panned down each overlap line at a map scale to inspect the overlap area. Any offset exceeding accuracy standards was re-rectified after the DTM and AT information was rechecked. dateTime: DateTime: 2004-09-15T00:00:00 processStep: (LI_ProcessStep) description: 8. Once the orthos were inspected and approved for accuracy, the files were copied to the network and downloaded by the ortho finishing department. This production unit was charged with radiometrically correcting the orthophotos prior to completing the mosaicking and clipping of the final tiles. The image processing technician performed a histogram analysis of several images that contained different land forms (urban, agricultural, forested, etc.) and established a histogram that best preserves detail in highlight and shadow areas. EarthData International has developed a proprietary piece of software called "Image Dodging." This radiometric correction algorithm was utilized in batch and interactive modes. Used in this fashion, this routine eliminated density changes due to sun angle and changes in flight direction. A block of images were processed through image dodging, in batch mode and displayed using Z/I Imaging OrthoPro software. At this point the images have been balanced internally, but there are global differences in color and brightness that were adjusted interactively. The technician assigned correction values for each orthophoto then displayed the corrected files to assess the effectiveness of the adjustment. This process was repeated until the match was considered near seamless. The files then were returned to digital orthophoto production to mosaic the images. 9. The processed images were mosaicked using the Z/I Imaging software. The mosaic lines were set up interactively by the technician and were placed in areas that avoided buildings, bridges, elevated roadways, or other features that would highlight the mosaic lines. File names were assigned. 10. The finishing department performed final visual checks for orthophoto image quality. The images were inspected using Adobe Photoshop, which enabled the technician to remove dust and lint from the image files interactively. Depending on the size and location of the flaw, Photoshop provided several tools to remove the flaw. Interactive removal of dust was accomplished at high magnification so that repairs are invisible. 11. The final orthophoto images were written out into GeoTIFF format. dateTime: DateTime: 2004-09-15T00:00:00 processStep: (LI_ProcessStep) description: The NOAA Office for Coastal Management (OCM) received the files in LAS format. The files contained Lidar elevation measurements. The data was in Florida State Plane Projection and NAVD88 vertical datum. OCM performed the following processing to the data to make it available within the LDART Retrieval Tool (LDART): 1. The data were converted from Florida State Plane West coordinates to geographic coordinates. 2. The data were converted from NAVD88 (orthometric) heights to GRS80 (ellipsoid) heights using Geoid03. 3. The LAS data were sorted by latitude and the headers were updated. dateTime: DateTime: 2008-01-25T00:00:00 source: (LI_Source) description: Source Contribution: The digital aerial photographic mission was composed of a total of 2 lifts of flight lines. Photography was obtained at an altitude of 9,450 feet above mean terrain. Digital photography was recorded in conjunction with airborne GPS; the stationary GPS receiver was positioned over a control point located at the airport. Recorded digital imagery was shipped via external hard drive to the production facility for processing. | Source Geospatial Form: Profile | Type of Source Media: Firewire Drive scaleDenominator: (MD_RepresentativeFraction) denominator: 14400 sourceCitation: (CI_Citation) title: Digital Aerial Photography of Sarasota County, FL date: (CI_Date) date: 2004-02-08 dateType: (CI_DateTypeCode) publication sourceExtent: (EX_Extent) temporalElement: (EX_TemporalExtent) extent: TimePeriod: beginPosition: 2004-02-03 endPosition: 2004-02-08 source: (LI_Source) description: Source Contribution: The lidar acquisition for Sarasota County consisted of 2 lifts of flight lines acquired in 2 sorties using the Leica ALS40 sensor. The data was acquired at a flying height of 6,000 feet AMT with a scan rate of 13 Hz and a 25 degree field of view. Approximately 3.04 billion raw lidar points were collected at a nominal 2 meter post spacing. | Source Geospatial Form: Profile | Type of Source Media: Firewire Drive sourceCitation: (CI_Citation) title: Lidar Acquisition of Sarasota County, FL date: (CI_Date) date: 2004-03-04 dateType: (CI_DateTypeCode) publication sourceExtent: (EX_Extent) temporalElement: (EX_TemporalExtent) extent: TimePeriod: beginPosition: 2004-02-28 endPosition: 2004-03-04 source: (LI_Source) description: Source Contribution: Kevin Chappell, a Florida PSM, under contract to EarthData International established 15 photo identifiable ground control after aerial imagery acquisition. The points were surveyed using GPS for both vertical and horizontal coordinate values. Ground control references Florida West State Plane NAD83, NAVD88 both in Meters. | Source Geospatial Form: Diagram | Type of Source Media: Electronic mail system scaleDenominator: (MD_RepresentativeFraction) denominator: 1200 sourceCitation: (CI_Citation) title: Report of Survey - SWFWMD, Sarasota County, FL date: (CI_Date) date: 2004-04-21 dateType: (CI_DateTypeCode) publication sourceExtent: (EX_Extent) temporalElement: (EX_TemporalExtent) extent: TimeInstant: timePosition: 2004-07-20 processStep: (LI_ProcessStep) description: The vertical values in this data set have been converted to reference North American Vertical Datum of 1988 (NAVD88) (GEOID18) meters, using the GEOID18 grids provided by the National Geodetic Survey. Any datum and projection transformations were then done with the Office for Coastal Management 'datum_shift' program. Compression to an LAZ file was done with the LAStools 'laszip' program and can be unzipped with the same free program (laszip.org) Processing notes: dateTime: DateTime: 2023-08-01T06:19:27 processor: (CI_ResponsibleParty) individualName: NOAA Office for Coastal Management contactInfo: (CI_Contact) address: (CI_Address) electronicMailAddress: coastal.info@noaa.gov role: (CI_RoleCode) processor | |